0€

CarTFT.com: Professional CarPCs and Displays

«   Change to: MiniPC.de – Small, flexible, powerful

Sprache ändern:

Deutsch
Shop for mobile PC- and GPS-solutions

Shop for mobile PC- and GPS-solutions

Product comments of AFelippe

Car-PC VoomPC-<b>2</b> (perfect for M1-/M2-ATX) [Black Edition] (<b>with TFT power connector</b>) VoomPC-2 (perfect for M1-/M2-ATX) [Black Edition] (with TFT power connector)
 | 13.09.2009
The best casing for car pc. It´s perfect! Fits all you need for such application.

Car-PC PCI Riser flexible (70 mm) PCI Riser flexible (70 mm)
 | 03.12.2009
This is something very important if you have plans of installing a PCI card like the one I used in my project (WI-FI + Bluetooth combined PCI board) specially if you're using such small enclosure like VOOM PC - 2. The PCI board can be placed in horizontal position because, in vertical position is impossible due to the size of the enclosure for example.

Car-PC CTF700 - VGA 7" TFT - Touchscreen USB - PAL/NTSC - IR Remote - Audio <b>(500 nits) [LED-Backlight]</b> CTF700 - VGA 7" TFT - Touchscreen USB - PAL/NTSC - IR Remote - Audio (500 nits) [LED-Backlight]
 | 03.12.2009
This is something extemely important for the carpc project!
Good quality image, functionallity, touchscreen, stereo audio imput, three (3) video imputs, one of them with automatic switch for rear camera... Everithing needed for a good CARPC project.
Initially I received the monitor with two dead pixels, than I returned it to CARTFT.com and they fixed it very very fast and also returned it very very fast.

Car-PC TFT Display Suction holder (Heavy-Duty / Holds up to 27 kg) *new* TFT Display Suction holder (Heavy-Duty / Holds up to 27 kg) *new*
 | 03.12.2009
Good quality suppot, strong and fixes very well.
The only thing I didn't like is that it is too short, it could be longer and with some more articulations for better positioning of the monitor.

Car-PC M<b>2</b>-ATX 6-24V DC/DC (160 Watts) M2-ATX 6-24V DC/DC (160 Watts)
 | 03.12.2009
This power supply is one of the most important thing for a carpc project! very good quality, really do what it was designed for!
I did myself several test with this power supply from one extreme to the other and it fits to a vast range of situations.
Test like voltage variations, start up with low voltage, shutdown etc...
It works very fine... I recommend!

Car-PC CTFWIKE-2 Wireless RF-keyboard with Trackball (10m range) [UK-Layout] *Compact* <b>SPECIAL</b> CTFWIKE-2 Wireless RF-keyboard with Trackball (10m range) [UK-Layout] *Compact* SPECIAL
 | 03.12.2009
Very good keyboard, small, usefull, trackball, very convenient!
It fits basically everywere in the car and of course it's something that cannot miss specially regarding a carpc project!
But, of course nothing is perfect! There is a point that I didn't like:
It spend battery a lot and it's not equipped with an on/off switch, so you should void things touching the kyboard when it's stored otherwise you will run out of battery fast!

Car-PC P4 connector cable (4pol-4pol) P4 connector cable (4pol-4pol)
 | 03.12.2009
Very good cable, useful for connection between the power supply and the motherboard.
Could be a little bit bigger in length, but it´s ok.

Car-PC VoomPC-<b>2</b> (perfect for M1-/M2-ATX) [Black Edition] VoomPC-2 (perfect for M1-/M2-ATX) [Black Edition]
 | 03.12.2009
Wonderful! exellent build quality and material used. I will not give five (5) stars just because the enclosure could be a little bit higher... something arround 80mm. therefore would be possible to assemble an wi-fi+bluetooth combined PCI card in it without having to install a PCI riser.
I don´t agree with a comment that a saw before that a colleage wrote before wherw he says that it´s not compatible with the Intel D945GCLF2D board. It IS compatible, because I´m using exatally this MB model.

Car-PC LogiLink Bluetooth 4.0 USB Adapter (Class 1, 100 Meter) LogiLink Bluetooth 4.0 USB Adapter (Class 1, 100 Meter)
 | 03.12.2009
This adapter works very fine and it fits to my purposes. I mounted it inside of an old desktop that I use only for test purposes, like when I need to test some programs, performance and etc. I liked very much this bluetooth adapter because, even assembled inside of an enclosure I got a good range... enougth for my use.

Car-PC SLIM-LINE DVD+-R/RW Panasonic <b>SLOT-IN</b> SATA (UJ-875A) SLIM-LINE DVD+-R/RW Panasonic SLOT-IN SATA (UJ-875A)
 | 04.12.2009
It's a Panasonic! Perfect! Works very fine, I already recorded several CD's and DVD's with this burner and I have never got an error... All recorded medias were successful burned and working fine. It fits perfectly inside the voompc-2 enclosure and you also save money with an adapter cabe because, it cames with it.

Car-PC Adapter SATA-HDD 2.5" to SATA-MB and Power Adapter SATA-HDD 2.5" to SATA-MB and Power
 | 04.12.2009
Extremelly necessary if you are planning to assemble a CARPC using a notebook 2,5'' SATA Hard Drive. You simple can easy connect the drive to the motherboard and you also have a compatible PC power supply connector attached to it.
I really recommend this adapter...

Car-PC All-In-One Extension cable for CTF-, MM-, MH- TFT Displays <b>- 2m -</b> All-In-One Extension cable for CTF-, MM-, MH- TFT Displays - 2m -
 | 06.12.2009
Very good to have if you´re planning to install your carpc inside the trunk of your car!

 | 06.12.2009
Good to protect the LCD!